Section work, Sequence: photometer, Work sequence: photometer – Hach-Lange LINK2SC User Manual
Page 47
Advertising
English 47
Work sequence: photometer
1.
Once the job has been transferred via LAN or SD memory card to
the photometer, press the LINK2SC button on the toolbar.
A LINK2SC job list is displayed.
2.
Select the job to be processed and use SELECT to open it.
The job details are then displayed: job ID, date, time, parameter,
sensor measurement value and proposed test.
3.
Use SELECT to activate the job.
The LINK2SC button with a yellow background indicates that a
LINK2SC measurement is to be performed. The parameter to be
determined is displayed on the button.
Advertising