Jungheinrich EKX_410 - Manual (Page 4)

Benefit from the advantages
Battery cover
Pioneering 3-phase AC technology
There are now more than 150,000
Jungheinrich trucks with 3-phase AC
technology in use worldwide. This
expertise is reflected in our current drive
and control generation:
• High throughput levels.
• Low energy consumption.
Control and CAN-Bus system
• All movements can be parameterised.
Economic energy management
• Double energy-saving benefits through
regenerative braking and lowering.
• Longer operating times on a single
battery charge (up to 2 shifts).
• Active energy and battery manage-
ment.
• Longer battery service life.
• 930 Ah battery (optional)
• Shorter charge times.
• Battery rollers for quick battery chang-
ing.
RFID ground control (optional)
• Truck control using transponder tech-
nology.
• Continuous measurement of travel
distance for precise ID of all warehouse
areas.
• High degree of flexibility in terms of
switching functions (end of aisle safety
control, lift/travel cutouts, speed
reductions)
• Drive speeds optimised according to
floor topology.
Jungheinrich warehouse navigation
system (optional)
• Linking the ETX to a Warehouse
Management System (WMS) using a
radio data terminal or scanner.
• Direct transfer of the destination in the
narrow aisle via the truck computer.
• Automatic vertical and horizontal
positioning in stacking or order picking
modes.
• Effective dual cycling.
• RFID location detection prevents trucks
reaching incorrect destinations.
• High level of flexibility in the ware-
house with adaptation to existing WMS.
• Throughput improved by up to 25%,
Ergonomic benefits and comfort
• Generously dimensioned cab entry.
• Outstanding visibility of load load and
aisle due to low swivelling sideshift
guidance and clear-view masts.
• Cushioned, adjustable/foldable
Comfort seat.
• Electrically adjustable control panel
with colour display.
• Soft keys with numeric keypad.
• Switchless two-handed operating con-
cept.
• End position/limit and transfer
cushioning of all hydraulic functions.
Commissioning and maintenance
• Quick and reliable commissioning
using ‘teach-in’ process.
• 1000 service hours maintenance
interval.
• Transmission oil in swing bearing does
not require replacement during the life
of the part.
• Electronics with wear-free sensor
system.
Reliable operation – high availability
• 70% fewer cables and plugs due to
CAN-Bus system.
• Torsion-resistant mast for high residual
capacities and reduced mast sway.
• Robust and maintenance-free three-
phase AC drive systems without
wearing parts.
Additional equipment
• Mechanical rail guidance.
• Wire guidance for precise control in
the aisle with no mechanical stress on
components.
• Radio with CD player and MP3 inter-
face.
• Synchronised traverse.
• Mechanical and electrical interfaces for
material flow management systems.
• Jungheinrich ISM: Information system
for truck management.
• Truck interface for accepting work
plans.
• Cut-out on overhead guard.
Integrated Jungheinrich personnel
protection system (PPS)
• On-site integration with the operating
computer.
• Project planning, commissioning and
maintenance by Jungheinrich.
T_EKX 410_05201
4_en_UK_000
Jungheinrich UK Ltd.
Head Office:
Sherbourne House
Sherbourne Drive
Tilbrook
Milton Keynes MK7 8HX
Telephone 01908 363100
Fax 01908 363180
[email protected]
www.jungheinrich.co.uk
Jungheinrich fork lift
trucks meet European
safety requirements.
The German production
facilities in Norderstedt and
Moosburg are certified.