Jungheinrich EKS_210-312 - Manual (Page 8)

Benefit from the advantages
Pioneering 3-phase AC technology
More than 150,000 Jungheinrich
3-phase AC trucks are in use all over the
world. This expertise is reflected in our
current drive and control technology:
• High order-picking efficiency.
• Low energy consumption.
• Effective thermal economy.
• Reduced maintenance and wear.
High throughput and order-picking
• 3-phase motors with high torque.
• High acceleration for driving and lifting.
• Quick main and auxiliary masts.
Modular design
High flexibility through modular design:
• Range of chassis and cabin width
options.
• Flexible operating console concept.
• Load-bearing components: auxiliary
masts, walk-on pallets or platforms.
• Free ranging.
• Mechanical rail guidance or inductive
guidance (both optional).
Future compatibility:
• Adaptor system for customising the
cab width to new operating require-
ments.
• Electronic height limitations for the
masts.
• TÜV-certified control system (CAN-
Bus) for maximum reliability.
Economic energy management
• Double energy-saving benefits through
regenerative braking and load lowering.
• Workplace lighting using energy-saving
LED spotlights.
• Activation of the LED work spotlights
upon reaching the destination
(optional).
• Longer operating times on a single
battery charge (up to 2 shifts).
• Active energy and battery management
• Longer battery lifetime.
• Battery rollers for quick battery ex-
change.
RFID floor control (optional)
• Truck control by transponder technol-
ogy.
• Continuous travel distance measure-
ment for precise recognition of all
warehouse areas.
• High flexibility for switching / safety
functions (aisle end recognition, lift /
drive cut-outs, speed reduction).
• Drive speeds optimised according to
the floor topology.
Jungheinrich warehouse navigation
• Linking the EKS to a Warehouse Man-
agement System (WMS) using a radio
data terminal and/or scanner.
• Direct loading of the destination within
the narrow aisle through the truck
computer.
• Automatic vertical positioning under
operator control.
• Automatic horizontal positioning under
operator control.
• High degree of automation.
• Improved order-picking performance.
• Optimised movements and dual
cycling possibilities.
• Elimination of incorrect positioning by
RFID location detection.
• High flexibility in the warehouse, as the
existing WMS can be modified to cater
for warehouse extensions.
Integral Jungheinrich personnel
• Factory-based integration into the
safety computer.
• Configuration, commissioning and
maintenance by Jungheinrich.
Ergonomic benefits and comfort
• Lower cabin platform height – only
245 mm.
• Large headroom.
• Flat surrounding barrier for easy access
to the pallet.
• Outstanding field of view over the load
and the aisle.
• Height-adjustable operating consoles
with integral shelf.
• Configurable membrane keyboard with
numeric pad.
• Switchless two-hand operation con-
cept.
• Drive control by thumb movement.
• Travel limit and damping of all hy-
draulic functions.
Control system (CAN-Bus)
• All movements can be set and adjusted
via parameter.
• Electronically controlled drive wheel
braking.
Commissioning and maintenance
• Quick and reliable commissioning
using “teach-in” principles.
• Integral diagnostic system for remote
maintenance using a modem.
• 1000 operating hours maintenance
interval.
• Electronics with wear-free sensor
system.
T_EKS 210/312_05201
4_en_UK_000
Jungheinrich UK Ltd.
Head Office:
Sherbourne House
Sherbourne Drive
Tilbrook
Milton Keynes MK7 8HX
Telephone 01908 363100
Fax 01908 363180
[email protected]
www.jungheinrich.co.uk
Jungheinrich fork lift
trucks meet European
safety requirements.
The German production
facilities in Norderstedt and
Moosburg are certified.