Jungheinrich ERD_220 - Manual (Page 4)

Benefit from the advantages
Fixed operator platform for maxi-
mum driver safety Precise operation with the pallet
stop Flexible and safe operation
Dynamic and efficient travel
The 3-phase AC drive technology and
control electronics (SpeedControl)
guarantee dynamic and energy-saving
handling which can be tailored to the
requirements of any application:
• Powerful 2.8-kW drive motor with
3-phase AC controller.
• Jungheinrich SpeedControl – roll-back
protection on gradients.
• Individually adjustable drive parameters
enable the truck to be tailored to
individual requirements (optional).
• Energy recovery through regenerative
braking on deceleration.
Outstanding handling and lift per-
formance
• Jungheinrich ShockProtect: Pro-
tection for the operator, truck and load
through additional drive suspension.
The suspension cushions the operator
and frame against harder impacts.
• Sprung and cushioned support wheels
– linked via the ProTracLink torsion bar
– ensure safe handling under all driving
conditions.
• Controlled hydraulics (optional) for
gentle depositing of the load and
for precise pallet positioning in the
racking.
Flexible and safe operation
• Depending on the application, it can
be used in ride-on or pedestrian mode
by folding the platform out or in. The
travel speed is automatically reduced
when in pedestrian mode.
• A fixed platform with an enclosed
operator position is available (optional)
where more stringent safety require-
ments are in place.
• In double-deck operation, two pallets
each weighing 1000 kg can be trans-
ported on top of each other at a maxi-
mum speed of 8 km/h (ERD 220 entry
model: 5 km/h).
Information at all times
Comprehensive control instrumentation
gives the operator information at a
glance at all times:
• CanDis information display (optional)
with hour-meter and service code
storage.
• Activation of truck via PIN and auto-
matic shutdown with CanCode
(optional).
Outstanding ergonomics
The moisture-proof tiller arm has rocker
switches on both sides and a clear red/
green colour code to match the ergo-
nomic requirements of the operator. The
ERD 220 also has the following features:
• Fatigue-free electric steering.
• Height-adjustable tiller arm on fixed
platform (optional).
• Additional pallet stop on chassis en-
sures precise positioning of two pallets
stacked on top of each other.
• Detachable storage compartment on
battery lid.
Long operating times
Large battery capacities ensure long
operating times.
• Battery compartment M: 3 PzS 250 Ah
• Battery compartment L: 3 PzS 375 Ah
• Battery compartment L high: 3 PzS
465 Ah
• Side battery removal option for multi-
shift environments
• Built-in charger (24 V/30 A for wet
cell batteries and maintenance-free
batteries) for easy charging at any
mains socket (optional).
Optional equipment
• Load backrest.
• Lowering speed reduction for pallet
lowering.
• Cold store version.
• Entry skids for lifting perimiter based
pallets.
• High-performance lift.
• Slow travel with lowered forks (fork
wear reduction)
• ERD 220 entry model with reduced
performance levels.
T_ERD 220 _04201
4_en_UK_000
Jungheinrich UK Ltd.
Head Office:
Sherbourne House
Sherbourne Drive
Tilbrook
Milton Keynes MK7 8HX
Telephone 01908 363100
Fax 01908 363180
[email protected]
www.jungheinrich.co.uk
Jungheinrich fork lift
trucks meet European
safety requirements.
The German production
facilities in Norderstedt and
Moosburg are certified.