Jungheinrich EMC_110 with ramp comfort - Manual (Page 4)

Benefit from the advantages
Used as a lift table Greater ground clearance with the
ramp comfort feature All travel and lift functions are in
the ergonomic multi-functional
tiller head A flexible stacker truck
Safe and comfortable stacking and
retrieval
All lifting and lowering functions are
conveniently controlled from the multi-
functional tiller arm:
• Precise and gentle depositing of loads
into the racking system or on the
floor. The lowering speed is electro-
hydraulically and precisely controlled
(in 2 stages) via a button on the tiller
arm (optional).
• Rapid operation with high lift speed.
• Automatic adjustment of the lift
height with intelligent lift positioning
(optional).
Ramp comfort for uneven floors and
gradients
Two heavy-duty cylinders increase
ground clearance below the critical
support arm areas. The slight backward
tilt of the truck brings the load into a
safe and stable position. This allows the
EMC to negotiate thresholds, undulating
gradients and uneven floors.
Working in very confined spaces
The EMC is an extremely compact
pedestrian stacker. The particularly short
chassis length and low weight allow for
use in extremely confined spaces, in the
lift and on mezzanines. The EMC is also
equipped with a crawl speed button. A
press of the button is all that’s needed for
the EMC to manoeuvre safely, even with
the tiller upright.
Work ergonomically
The newly developed tiller head is per-
fectly adapted to the ergonomic needs
of the operator:
• Colour coding for intuitive operation
and buttons with wear-resistant icons.
• Grip angle to suit the hand position of
the operator.
• Rocker switch for consistent operation
in all tiller positions.
• Horn button positioned in the centre of
the tiller for ease of access.
Reduced maintenance costs
Service-friendly components ensure
lower maintenance costs in the long-
term:
• Maintenance-free 3-phase AC drive
motor.
• Rapid access to all components via a
one-piece front panel.
Long operating times
The battery, when used together with
the energy-saving AC system, gives long
operating times:
• Maintenance-free 24 volt /70 Ah block
batteries (gel system).
• Integrated 230 volt /10 A charger for
easy charging at any 13 Amp plug
socket.
• Integrated 110 volt charger (optional).
Optional equipment
• CanCode for PIN activation (instead
of key switch) and automatic shut-off
function.
• Discharge indicator and CanDis
hourmeter counter.
• ISO fork carriage with forged forks
T_EMC 110 with ramp com
fort_04201
4_en_UK_000
Jungheinrich UK Ltd.
Head Office:
Sherbourne House
Sherbourne Drive
Tilbrook
Milton Keynes MK7 8HX
Telephone 01908 363100
Fax 01908 363180
[email protected]
www.jungheinrich.co.uk
Jungheinrich fork lift
trucks meet European
safety requirements.
The German production
facilities in Norderstedt and
Moosburg are certified.