Jungheinrich ERE_120 - Manual (Page 4)

Benefit from the advantages
Intelligent control and powerful
3-phase AC motor
The ERE is equipped with a 3-phase AC
drive motor, offering greater perform-
ance while simultaneously reducing
operating costs. Make the most of these
advantages:
• High level of efficiency with excellent
energy management.
• Powerful acceleration and high speed.
• Rapid change in direction
• No rolling back on gradients.
• Maintenance-free drive motor.
• Energy recovery through regenerative
braking on deceleration.
The truck model can be adapted to
the application profile
The truck is available in a number of
different models, offering flexible ap-
plication opportunities:
Model 1: Folding stand-on platform with-
out restraint system
• Pedestrian mode.
• Speed of 4.5km/h when stand-on plat-
form is folded up.
• Speed of 6 km/h when stand-on plat-
form is folded down.
Model 2: Folding stand-on platform with
restraint system (optional)
• Pedestrian/ride-on mode.
• Speed of 4.5km/h when stand-on plat-
form is folded up and restraint system
retracted.
• Speed of 6 km/h when stand-on
platform is folded down and restraint
system retracted.
• Speed of 8.5km/h when stand-on
platform is folded down and restraint
system folded out.
Optimum driving characteristics
• ProTracLink: Sprung and cushioned
support wheels – linked via a torsion
bar – ensure safe handling in all driving
conditions.
• ShockProtect: Additional sprung sus-
pension provides protection for the
operator, truck and load. Optimally
adjusted to the load, the suspension
cushions the operator and frame
against harder impacts.
Everything at a glance
The optimally configured controls pro-
vide the operator with all the information
required at a glance at any time:
• CanDis provides information on battery
charge status, hourmeter and service
code storage (optional).
• CanCode facilitates activation of the
truck via PIN, with the opportunity to
individually specify authorised oper-
ators (optional).
• The adjustment options for the drive
parameter settings allow for optimum
adaptation to any application (op-
tional).
Reduced maintenance costs
Service-friendly components and ease of
access reduce operating costs:
• Easily removable components allow for
ease of access to the units.
• Maximum speed only possible when
forks are raised (optional). This reduces
wear beneath the forks.
Long operating times
Battery capacities of up to 375 Ah
guarantee long operating times:
• Battery compartment M: 180/250 Ah
• Battery compartment L: 300/375 Ah
• Lateral battery exchange for both
battery compartments (optional).
Additional equipment
• Entry skids and entry rollers.
• Load guard.
• Cold store model.
T_ERE 120_04201
4_en_UK_000
Jungheinrich UK Ltd.
Head Office:
Sherbourne House
Sherbourne Drive
Tilbrook
Milton Keynes MK7 8HX
Telephone 01908 363100
Fax 01908 363180
[email protected]
www.jungheinrich.co.uk
Jungheinrich fork lift
trucks meet European
safety requirements.
The German production
facilities in Norderstedt and
Moosburg are certified.