Start-up and operation – King Technology FROG Leap Model 7800 User Manual

Page 5

Advertising
background image

5

For a 90-day algae protection
guarantee, insert FROG Leap ALL-
OUT!™ into FROG Leap Anti-Bac
Mineral Pac™ in Infuzer.
(See page 9 for directions.)

Start-up and Operation

-

FROG Leap Anti-Bac Mineral Pac™ now with 25% More Water Polishers for easier start up.

Add a stabilizer or conditioner to the
pool at the beginning of the season if
the stabilizer level is below 20 ppm.
This will prevent chlorine burn off. Follow
manufacturer’s directions carefully.

Install an FROG Leap Anti-Bac Mineral
Pac™ into the FROG Leap Infuzer™.
(See page 7 for directions.)
REPLACE THE FROG Leap ANTI-BAC
MINERAL PAC™ EVERY 6 MONTHS OR
AFTER ONE POOL SEASON WHICHEVER
IS SHORTER.
Replace cap and run FROG Leap
Infuzer™, with FROG Leap Anti-Bac
Mineral Pac™ inserted, for 10 minutes
at Setting 5.

When chlorine reading is down to
1.0 ppm, which may take a few
days, insert FROG Leap Torpedo
Pac™. (See page 8 for directions.)

Create a chlorine residual with
FROG Leap Reveille™ or a chlorine
shock (see page 8 for FROG Leap
Reveille™ directions). THIS STEP
IS VERY IMPORTANT TO START-UP.
Always begin with chlorine in the
pool water.

1.

3.

2.

5.

4.

6.

Shock the pool with FROG Leap
Depth Charge™ to rid the water of all
contaminants. (see page 8 for FROG
Leap Depth Charge™ directions)

St

ab

ili

ze

r

If using standard chlorine shocks do not add in or
near the skimmer or into the FROG Leap Infuzer™
as it could damage equipment, risk potential
explosion or discolor your pool surface.

REVEILLE

Advertising