Using frog leap pacs, Using – King Technology FROG Leap Model 7800 User Manual

Page 8

Advertising
background image

8

Replace cap by hand only.
DO NOT OVER TIGHTEN.

Line up the small leg of the pac
with the small opening in the
FROG Leap Anti-Bac Mineral Pac™
and the large leg with the large
opening. Lower pac into FROG
Leap Anti-Bac Mineral Pac™ until
secure.

Avoid sparks, open flame or smoking when handling
FROG Leap Depth Charge™, FROG Leap Reveille™ or
FROG Leap Torpedo Pac™.

FROG Leap Depth Charge™ is a one time start-up product used
to rid the water of all contaminants. FROG Leap Reveille™ - also
used at start up, sets the chlorine residual to help find the proper
dial setting for maintaining up to 50%* less chlorine while using
the FROG Leap Torpedo Pac™ (EPA Reg. No.: 53735-2). All three
products sold separately.

Using

FROG Leap Depth Charge™, FROG Leap Reveille™ or FROG Leap Torpedo Pac™

OTHER PAC

FROG LEAP

ANTI-BAC

MINERAL

PAC

PAC

TOWERS

PAC

TOWERS

COLORED

CAPS

Turn pac over and shake slightly until
ingredients fall into tower areas.

To remove colored caps, grab onto
the lip of one cap with a pliers and
pull up until cap releases. Repeat
the process for the other cap.

1

.

2.

3.

4.

REVEILLE

FROG Leap

Depth Charge™

FROG Leap

Reveille™

FROG Leap

Torpedo Pac™

Run the pump and filter for each pac according to the
directions on the product label. Remove from the FROG
Leap Infuzer™ when empty and discard or offer for
recycling.

Turn control dial on FROG Leap Infuzer to setting 5.

Mark your calendar for the approximate replacement times
for the FROG Leap Torpedo Pac™.

6.

5.

7.

Advertising