Kolpin BXS4860 – Box Scraper Ends User Manual
Bxs4860 – box scraper ends
BXS4860 – Box Scraper Ends
No Part
Name
Description
Qty
1
Left hand end plate assembly
1
2
Right hand end plate assembly
1
3
Bolt
5/16" x 1"
8
4 Nylock
Nut
5/16"
8
5 Flat
Washer
5/16"
8
6
Bent Hitch Pin
5/8" x 3"
2
7
"R" Pin - Keeper
Ф3mm 2
Assembly Instructions:
1. Secure #1 and #2 (End Plates) to Rear Blade Assembly with 5/6” Bolts, Washers
and Nylock Nuts as shown in picture above.
2. Use (2) #6 (3” Bent Hitch Pins) to secure Rear Blade / Box Scraper assembly to
Accessory Tool Bar, secure Rear Blade Pivot Assembly with 5/8” x 3” Bent Hitch Pin
to Accessory Tool Bar also.
For additional assistance, please contact our customer service department at (877)-9KOLPIN or
.
Kolpin Powersports, Inc. - 205 N. Depot Street - Fox Lake, MN 53933
Phone (920) 928-3118 - Web: www.kolpinpowersports.com