Kolpin 20129 – Gun Boot IV Metal Bracket - Manual

Rev. 01 4/30/2012
Installation Instructions
Gun Boot® IV Mount for Bed Rails (20129)
(Fits Kawasaki Mule, John Deere Gator, and others)
Your new Gun Boot® IV Case Mounting Bracket is perfect for attaching to the bed
rails of utility ATV’s. When you open your bracket, please make sure the following
items are enclosed in your box before beginning.
Part Description Quantity
A Rear Bracket 1
B Front Bracket 1
C 5/16"-1" SAE bolt 4
D 5/16" USS flat washer 8
E 5/16" SAE locknut 4
F Locking Pin 1
Rear Bracket
Front Bracket
Installation:
Note: The mounting brackets can be mounted to either side of the bed rail.
1.Position Rear Mounting Bracket on bottom of Gun Boot IV so that the Locking Pin
goes through the center hole of bottom of Gun Boot IV. Place Front Mounting Bracket
on muzzle end of Gun Boot IV. Align Gun Boot IV and both brackets on side rail and
mark the bolt hole positions. (Distance between the brackets should be about 11.25in.)
Front Bracket
Rear Bracket