Kolpin 85190 – Polaris XP - 2 Receiver Hitch - Manual

Rev. 1
85190 – Polaris XP - 2” Receiver Hitch
Hitch Mounting:
1. Loosen the (2) OEM Nuts from the ATV as pointed out above.
2. Slide the hitch into the OEM 1 ¼” Receiver, making sure that the (2) Top OEM
Bolts slide through the Kolpin Hitch.
3. Place the (2) OEM Nuts back onto the OEM Bolts. Don’t tighten yet!
4. Place the ½” Bolt provide through the 1 ¼” Receiver on the bottom side of the
hitch using (2) ½” Washers, one on each side.
5. Place the ½” Nylon Nut provided on the ½” Bolt.
6. Now that the hitch is all connected to the ATV, Tighten ALL hardware securely,
making sure the hitch is tightened evenly, and the ½’ Bolt is tightened last.
Kolpin Outdoors, Inc.
205 N. Depot St, Fox Lake, WI 53933
Phone #: (877) 9KOLPIN or (920) 928-3118
www.kolpin.com
[email protected]
Description Quantity
XP Hitch Weldment 1
½” - 13 x 2.25” Hex Head Bolt 1
½” Nylon Nut 1
½” Washer 2
5/8” x 3.00” Bent Hitch Pin 1
R-Pin 1
Loosen and
Remove Nuts