Kolpin 85195 – Polaris XP (2010-2011) 2 Receiver Hitch - Manual

Rev. 1
85195 – Polaris XP (2010-2011)
2” Receiver Hitch
Hitch Mounting:
1. Slide the hitch into the OEM 1 ¼” Receiver on the ATV.
2. Run the (2) ½” x 1.50” bolts thru the top of the hitch, then through the lock
washer and then through the frame of the ATV. Secure using the washers and
the Nylon Nut provided.
3. Place the ½” x 2.25” Bolt provide through the 1 ¼” Receiver on the bottom side of
the hitch using (2) ½” Washers, one on each side. Place the ½” Nylon Nut
provided on the ½” Bolt.
4.
Now that the hitch is all connected to the ATV, Tighten ALL hardware securely,
making sure the hitch is tightened evenly.
Kolpin Outdoors, Inc.
205 N. Depot St, Fox Lake, WI 53933
Phone #: (877) 9KOLPIN or (920) 928-3118
www.kolpin.com [email protected]
Description Quantity
XP Hitch Weldment 1
½” - 13 x 2.25” Hex Head Bolt 1
½” -13 x 1.50” Hex Head Bolt 2
½” Nylon Nut 3
½” Washer 6
Lock Washers 4
5/8” x 3.00” Bent Hitch Pin 1
R-Pin 1