Monitor parameters, Monitor parameters -39, Control parameter 05 = 50 – CONTREX ML-Drive User Manual
Page 73
3 - 39
MONITOR PARAMETERS
Parameters are divided into two classifications; Control Parameters (CP) and Monitor
Parameters (MP). The numbered code that represents the Parameter is the Parameter
Code. The operational data is the Parameter's value.
Control Parameter 05
=
50
(default)
Parameters =
Monitor Parameter 40
=
200
(arbitrary)
Parameter Code
Parameter Value
This section is about Monitor Parameters. Control Parameters are explained in
Operation: Control Parameters,
page 3-7.
The ML-Drive has a number of Monitor Parameters (MPs) that monitor the performance
of the ML-Drive and your system, troubleshoot for problems, and confirm the wiring and
tuning. MPs can be accessed at any time during the ML-Drive's operation, including
during Run, Jog, R–Stop and F–Stop.
Note:
Monitor Parameters are status indicators only - you can not directly affect a MP.
There are four categories of Monitor Parameters:
Input Monitoring.
Output Monitoring.
Performance Monitoring.
Status Monitoring.
In the subsections that follow, the Monitor Parameters are listed according to these
categories.