Controlled Products Systems Group 6050-080 - Manual (Page 6)

Page vi
Install The Gate Operator Only If:
• The operator is appropriate for the usage Class of the application.
• All exposed pinch points are eliminated or guarded.
• This operator is intended for installation only on swing gates used to control vehicular traffic.
Pedestrians must be provided with a separate access opening.
• The gate must be installed in a location so that sufficient clearance is provided between the
gate and adjacent structures when opening and closing to reduce the risk of entrapment (see
diagram). Swinging gates should not open into public access areas.
• The gate must be properly installed and work freely in both directions prior to the installation
of the gate operator. Do not over-tighten the operator clutch to compensate for a damaged
gate.
• Controls must be far enough from the gate so that the user is prevented from coming in
contact with the gate while operating the controls. Outdoor or easily accessible controls
should have a security feature to prevent unauthorized use.
• All warning signs and placards must be installed where visible in the area of the gate.
RESTRICTIONS AND WARNINGS