Controlled Products Systems Group AOMSL100 - Manual (Page 10)

Locate limit switch box.
Step 1: Turn the on operator.
Step 2: Use a screw driver to pull limit lock plate outwards. Turn
Limit nut to desired direction.
Step 3: Place limit plate to its locked position.
Step 4: Turn the operator back on.
Step 5: Run gate operator. If more adjustment is needed, repeat
the steps.
power off
Limit nuts Limit switch
Limit nut lock plate Each notch equals about ½”
of gate travel.
GATE TRAVEL ADJUSTMENT
FOR SL-150
17
Limit plate must be tight in limit nut slots for gate to hold it’s
limits.