Controlled Products Systems Group SW4705011G3 - Manual (Page 7)

7
SAFETY LABEL PLACEMENT
SAFETY PRECAUTIONS FOR SWING & ORNAMENTAL “GRILL TYPE” GATES
Injuries can occur when pedestrians stand in the path of a moving gate, or in their entrapment zones.
Non contact sensors, such a photo eyes, must be incorporated into the swing gate system to assist in
the protection of people who may come near the gate operating system. Gate edges maybe used as
additional entrapment protective devices.
UL325 requires that, when used, contact sensors shall be located so that they protect against entrap-
ment during both open and close gate cycles.
01-G0665F18
The UL required Warning Signs must be installed in plain view and on both sides of each gate installed.
Each sign is made with fastening holes in each corner and should be permanently secured in a suitable
manner. Warning label on unit should be visible.
Injuries occur when people are caught between a moving gate or a rigid object such as a stationary
fence post or fence (See Safety Brochure for details).