Aiphone FK1629 - Manual (Page 10)

10
OUTLINE OF OPERATIONS
This manual mainly describes the following operations.
Operations you can do within a site (communication, transferring, paging, monitoring, door release, etc.) •
Operations you can do between sites (communication, transferring, paging, door release, etc.) •
NOTES:
The arrows in the fi gure above show examples of operations. •
For operating a PC master station (IS-SOFT), refer to the “OPERATION MANUAL” for the PC master station. •
The term “a remote site” used in this manual means “a network direct system in a remote site”. •
You can communicate with the pilot station or page the pilot zone registered in a remote site. You cannot select a desired station or zone in a •
remote site.
Depending on the system confi guration of a remote site, some operations to the site may be disabled.
•
A call or talk may not be possible when the communication path is fully occupied. •
Video images at the target video door station may not appear on the monitor when the video path is fully occupied even though a call or talk is •
possible.
IP IP IP IP IP IP
IP
IP
Network direct system Network direct system
The pilot station or zone
that receives a call, paging,
etc. from a remote site.
Communication, Communication,
transferring,
transferring,
paging, door
paging, door
release, etc.
release, etc.
Communication, Communication,
transferring,
transferring,
paging, door
paging, door
release, etc.
release, etc.
: Control offi ce, etc.
Building A Building B
Internet / WAN
LAN (IP network) LAN (IP network)
Site 1
Site 2 Site 32
Site 3
IP unit
Communication, transferring, Communication, transferring,
paging, monitoring, door
paging, monitoring, door
release, etc.
release, etc.