Aiphone FK1629 - Manual (Page 18)

18
E
Setting the call transferring [TRANSFER]
You can make the following settings for transferring calls.
Sub item Description Setting range
[CALL
TRANSFER] Enables (ON) or disables (OFF)
the call transferring. ON
OFF
[TRANSFER
DESTINA]
(Transfer
destination) (Available when [CALL
TRANSFER] is set ON.) (Registering a
master station or
a remote site)
Selects a master station in your
site or a remote site as the
transfer target.
[TRANSFER
DELAY] (Available when [CALL
TRANSFER] is set ON and the
target is set at [TRANSFER
DESTINA].) 00-60 (sec.)
Sets the time of starting
transferring after a call is received.
[SCHEDULE
TRANSFER] Enables or disables the call
transferring to be performed
on the schedule preset by the
system settings automatically. ON
OFF
[SCHEDULE
DESTINA]
(Schedule
destination) (Available when [SCHEDULE
TRANSFER] is set ON.) (Registering a
master station or
a remote site)
Selects a master station in your
site or a remote site as the
transfer target on the schedule.
Press 1 repeatedly to select [TRANSFER] (so
that it is highlighted), and then press ZOOM/WIDE
to select.
The sub items can also be displayed by pressing *
TRANSFER in the standby mode.
NOTE:
The above display example differs from the actual one.
Press 2 repeatedly to select the target sub
item (so that it is highlighted), and then press
ZOOM/WIDE to select.
Make the settings on each sub item as follows. 3
[CALL TRANSFER]:
Press repeatedly to select ON or OFF, and then
press ZOOM/WIDE to decide on the selected one.
[TRANSFER DESTINA] (Transfer destination):
This setting is available only when [CALL TRANSFER] is ON. *
Press repeatedly to select the target master station
in your site or a remote site (so that it is highlighted), and
then press ZOOM/WIDE .
The LED on * TRANSFER lights up (red) when [CALL
TRANSFER] is set ON and the target is set at [TRANSFER
DESTINA].
[TRANSFER DELAY]:
This setting is available only when [CALL TRANSFER] is set *
ON and the target is set at [TRANSFER DESTINA].
Press repeatedly to set the delay time, and then
press ZOOM/WIDE to select.
If the delay time is set to “00”, a call will be transferred to the *
target directly.
[SCHEDULE TRANSFER]:
Press repeatedly to select ON or OFF, and then
press ZOOM/WIDE to decide on the selected one.
[SCHEDULE DESTINA] (Schedule destination):
This setting is available only when [SCHEDULE TRANSFER] *
is ON.
Press to select the target master station in your site
or a remote site (so that it is highlighted), and then press
ZOOM/WIDE .
Press *
SETTING
as “BACK” function to return to the
previous screen. The sub items are displayed.