AT&T 1480 - Manual (Page 9)

INSTALLATION
6
7 Connect the corded handset to the base.
8 Connect the telephone line cord to the modular telephone jack.
9 Plug the power cord into the electrical outlet.
The ANSWER ON/OFF light goes on, and
CL flashes in the Message
Window.
Use only the power cord supplied with this product. If you need
a replacement, call 1 800 222–3111.
10 Mount the base on the wall.
11 Check for dial tone.
Lift the handset; you should hear a dial tone.
a) Align holes
on base with
mounting
studs on wall
jack.
b) Pull base down on
mounting studs until
it locks into place.
1480_book_1ATT 2/25 2/25/02 10:30 AM Page 6