Magnum Venus Plastech Pro Series 11:1 PRO PUMP VPRO-45110 - Manual (Page 7)

7
REQUIREMENTS:
Air Requirements:
Clean, dry compressed air must be available at up to 90 psi (6.3 kg/cm 2 ) and a minimum
volume of 12 CFM (340 l / min.). Air must be provided through an air hose with a diameter
of 0.5 inch (1.3 cm) or greater.
Tool and Supplies Requirements:
When performing service and repair on the Pro Pump, you should have the following tools,
spare parts and supplies available before beginning.
NOTE: Items followed by a * may be purchased from Magnum Venus Products.
 One table vise
 Loctite™ (removable)
 One small hammer
 Needle-nose pliers
 Solvent or emulsifier for cleaning
 One clean work table
 Anti-seize thread sealant
 Set of hex wrenches * (08469)
 One 5/8-inch wrench * (08474)
 One 9/16-inch wrench * (08476)
 One 5/16-inch wrench * (08477)
 Empty buckets for cleaning
 Clean ¼-inch plastic dowel or rod
 One 8-inch adjustable wrench * (08467)
CHAPTER
2