Magnum Venus Plastech ADVANTAGE - Manual (Page 32)

Advantage Gelcoater
Chapter
8
Connect Catalyst Pump
Pull out the lower quick pin that attaches the bottom of the catalyst pump
to the bottom slave arm.
Line up the bottom bearing block of the catalyst pump with the hole in the
bottom slave arm that matches the catalyst percent number you want.
Use a quick pin to attach the catalyst pump to the bottom slave arm (See
Figure 26).
Line up the hole in the upper bearing block with the matching hole in the
upper slave arm (see Figure 27).
Use a quick pin to attach the upper bearing block to the upper slave arm.
Attach mix housing onto front of gun block.
ADVANTAGE Gelcoater
Connect Catalyst Pump
CAUTION
When lower quick pin is out, do not let the piston rod
bottom out in the catalyst pump or the inlet body ball will
be damaged and must be replaced.
28