Magnum Venus Plastech ADVANTAGE - Manual (Page 41)

Advantage Gelcoater
Figure 33: Relieving Pressure from Accumulator
Place a container under the resin pump filter and slowly unscrew the filter
tank from the filter body (see Figure 34).
Clean the filter tank, spring, screen and filter core in solvent. Allow the
parts to air dry.
Slowly begin to unscrew the resin accumulator.
DANGER DANGER DANGER DANGER DANGER
NOTE
If the filter is difficult to unscrew by hand, use a cloth
strap wrench or a chain wrench to prevent damage to
the filter.
NOTE
Clean your filter once a week and when changing
colors for a multi-color operation.
NOTE
STOP! If accumulator is hard to unscrew by hand, accu-
mulator may still be charged. Gently push a rod up into
the resin filter body and gently push up on the poly ball.
This relieves the charge from the accumulator. Once the
charge is relieved, unscrew the accumulator.
37