Magnum Venus Plastech ADVANTAGE - Manual (Page 51)

Advantage Gelcoater
Weekly Maintenance Checklist
This schedule is based on a one shift, 5-day work week, using standard
GRP resin (an idle unit left with resin in it may require more frequent part
replacing.)
Part: Procedure:
Gauges and Regulators Check for wear, damage, and
proper operation
Resin Accumulator Remove and clean inside
Resin Filter Wash and inspect filter screen for
damage
Power Head Clean silencer with solvent and
blow dry
Resin Pump Lower Assembly Check pickup hose and wand for
leaks or damage. Check inside
the center section for packing
leaks.
Flush Tank Clean any residue and rinse with
solvent.
Air Lines Check for leaks, wear, and kinks.
Replace line as needed
47