Little Colorado Bed Traditional Toddler 84,88 User Manual

Little Colorado Products for children

Advertising
background image

9/09

®

Inc.

Contents:

Children's Furniture Made In America

Established 1987

www.littlecolorado.com

WARNING: Adult Assembly Required

WARNING: Assembly Kit Contains Parts With Sharp Points, Sharp Edges,

and Small Parts That Can Present Choking Hazards to Children.

WARNING: Components Are Packed In Plastic Bags That Are A Suffocation Hazard.

1 headboard

1 footboard

2 sides

8- 1" Screws

3 mattress supports

Manufactured by Little Colorado, Inc. 4450 Lipan Street Denver, CO 80211

Phone 303-964-3212 Fax 303-964-3213 www.littlecolorado.com email [email protected]

Assembly Instructions For Little Colorado, Inc. Toddler Beds Items #84 and #88

You will need a standard phillips screwdriver to complete assembly.

1. Install four screws about halfway into the four pre-drilled holes in the headboard and also into the four corresponding pre-

drilled holes in the footboard.
2. Arrange the parts so that the 3/4" by 3/4" wooden cleats are on the inside of each of the sides and the headboard and

footboard. These cleats hold up the mattress supports.
3. Position the top and bottom holes in the metal brackets over the heads of the screws in the headboard and footboard and

slide them down until firmly seated.
4. Tighten all the screws that are now holding up the sides and drop in the mattress supports. You will notice that two of the

three mattress supports do not have square corners. These two pieces fit in the corners of the bed. The remaining mattress

support fits in the center. You are now finished. Please contact us if you need any help in assembly.
When you need to disassemble these products, follow these instructions in reverse. All of us at Little Colorado, Inc. hope that

you and your little ones enjoy this Toddler Bed for many years and then pass it on the the next generation.

The minimum age shall be no less

than 15 months and the maximum

weight shall not be greater than 50

lb. ( 22.7 kg).*

The mattress intended for use

on this bed shall be a full-size crib

mattress having minimum 51.625

in. (1310 mm) in length and 27 in.

(690 mm) in width and thickness of

less than 6".

*This statement is required by law to be

disclosed on all Toddler Beds.

WARNING: Do not place items with a string, cord or ribbon around

a child's neck, such as hood strings or pacifier cords.

WARNING: Do not suspend strings over a Toddler Bed for any reason.

WARNING: Do not attempt to use any type of additional add on guard rails with this bed.

WARNING: Do not place bed near windows where cords from blinds or drapes may strangle a child.

Helpful hints.....

Let your child help you assemble this

bed. Assure your child that this is their

special bed, just their size. Let them

watch you move their crib mattress

from their crib to their new special bed

and let them help you make it up with

their crib bedding. Now that your child

is more familiar with their new toddler

bed, the transition experience from the

crib will be much more comfortable for

them and for you. This worked very

well for our children.

Cheryl and Dick Shaw, founders of

Little Colorado, Inc

.

Advertising