Max Machinery 121 INDICATOR - Manual (Page 35)

121-000-350 © 2001 Max Machinery, Inc. Pg 35
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
6.4.20
SERIAL USAGE
SERIAL USAGE
SERIAL HARDWARE
RS232 RS485
DEVICE ID
##
BAUD RATE
300 600 1200 <more>
BAUD RATE
2400 4800 9600 19200
PARITY
None Odd Even
HANDSHAKING
None Softwre Hardwre
DEVICE LINE FEED
<CR> <CR+LF>
MODEM OPTIONS
No Yes
MODEM INIT MASTER
No Yes
MODEM AUTO ANSWER
No Yes
CALL OUT PHONE #
0
CALL OUT TIME
##:##:##
Continued on Next Page
Press Enter to begin setup of the Serial Port.
Select Serial Hardware type for standard port.
Select the Device ID.
Select the desired Baud Rate.
(If <more> selected)
Select the desired Parity.
Set the Handshake.
Choose end of line termination. Only choose <CR> if
your external device automatically assigns a line feed for
every <CR> carriage return.
Select "Yes" if the serial port will be used to control a
modem.
Select "Yes" to have the unit engage in a configuration
conversation with the modem on power up .
Select the desired Modem Auto Answer mode.
Enter the Call Out Phone Number to be dialed for "Call
Out Time" or "Print On Error/Alarm".
Enter the time of day to perform Call Out transmission.