Untitled – Micromod Micro-DCI: 53MC5000 Multi-Loop Process Controller Installation User Manual

Page 34

Advertising
background image

•

The display shows the POINT entry line at the bottom of
the display, as shown on the right.

•

Press the key until the character "B" appears on
the entry line.

•

Press the key to shift the first entry one position to
the left.

•

Press the key until "1" appears on the entry line.

•

Press the key to shift this entry one position to the
left.

•

Press the key until "2" appears on the entry line.

•

The entry-line should now appear as shown on the
right.

•

Press F3 to accept the entry.

•

The contents of DATAPOINT B012 are displayed at the
bottom of the display as shown on the right.

•

Press the Mode button to return the instrument to
operator mode.

MODULAR CONTROLLER QUICK START

3-9

Advertising