Micromod Micro-DCI: 53MC5000 Multi-Loop Process Controller Installation User Manual

Page 39

Advertising
background image

•

If more than one module of the type selected is avail-
able, a list of modules appears showing module number
and TAGNAME

•

Use the buttons to scroll to the desired module,
in this example the CONTROL-0 module is selected.

•

The screen should now be similar to the one to the
right.

•

Press F3 to select the desired module.

•

If more than one screen of parameters is available, the
parameters are grouped into separate sections (called
PAGES) which are listed as shown in the screen to the
right.

•

Use the button to scroll to the desired PAGE.

•

In this example, the TUNE page is selected, as shown
on the right.

•

Press F3 to select the desired page.

•

This should show a list of parameters that the selected
PAGE consists of, similar to the one to the right.

•

Use the keys to navigate to the desired parame-
ter

•

Press F3 to select the desired parameter to be config-
ured.

•

Depending on the type of data associated with the pa-
rameter, one of three methods may be used to config-
ure the data as shown on the next page:

MODULAR CONTROLLER QUICK START

3-14

Advertising