Micromod MOD: 30ML Functions Data Base Reference - Manual (Page 130)

MOD 30ML Functions
CONFIGURATION EXAMPLES
3.3.8 PIDTOT2.CSM- Totalizer and PID with Separate Commands Menu
This compound includes the totalized value as part of the PID display. However, the totalizer
commands menu is assigned to a separate display tag.
To use this compound:
1. Enter your loop tag name in the display (PIDDISP and TOTDISP) blocks and in the tag
list of DIF block.
2. Set the to “User” and enter the Display Tag name in the
field. This causes the instrument to come up after a power loss with your new display.
3. Enter the totalizer block and set the proper rate, threshold, etc. values.
4. Set the input and PID block fields to meet with your particular application.
5. Enter a scan group rate in the IF block.
6. Add the data found in the State Table Description block to the State Table Block by
adding the state table found below.
7. Place the proper communications block.
8. Compile and download the strategy.
Figure 3. 37. Totalizer 2 Compound
3-36