Micromod MOD: 30ML Functions Data Base Reference - Manual (Page 15)

MOD 30ML Functions
DISPLAY BLOCK
20 to 59 Input 1 through Input 800 (I1 to I800)................................................................................ CWR
The user name for an input is an eight (8) character alphanumeric used to identify the input.
The default names are I1 through I800. The valid types are:
NONE Indicates an unused input (do not reference elsewhere).
REMOTE Any external variable, any data type.
LOCAL Any local data, any data type.
2.2.3 Display Block Configuration Screens
The displays used to configure the display block are described below.
Display Block Page 1
Use this display page to identify the display block, access the inputs, formats and edit display
scripts displays, and configure initial values for lines.
Figure 2-2. Display Block (DISP), Edit Display, page 1
Block Name:
Up to 8 alphanumeric characters identifying block.
Description:
Any descriptive text.
Bad Inputs: (See attribute 3 description.)
If checked, Block runs without a check on input quality. If not checked, the Run Complete
input is treated as FALSE when the input quality is BAD.
2-7