Micromod MOD: 30ML Functions Data Base Reference - Manual (Page 95)

MOD 30ML Functions
CONFIGURATION EXAMPLES
SECTION 3
CONFIGURATION EXAMPLES
3.1 GENERAL
This section has tutorials for configuring a complete PID loop application. This section is
divided in to two parts:
1. Configuration Examples using the ViZapp or Visual Application Builder Software
2. Configuration Examples using the DOS based Application Builder Software
3.2 GETTING STARTED USING THE VIZAPP SOFTWARE

This section explains how to configure a PID loop by using the ML_PID compound from
the Gallery. Refer to the ViZapp Help file and the ViZapp training manual IB-VIZAPP-TUT
and the Display Guide IB-1800R-SCR for more examples and reference.
1. Launch ViZapp. Select Programs from the Windows Start menu. Select ViZapp from the
menu. The ViZapp configurator will launch as shown in the next figure. As you will notice, the
configurator will be blank with no workspace loaded on the screen.
Figure 3. 1. ViZapp Configurator
Note that the configurator screen has two frames (left and right).
3-1