Micromod MOD: 30ML Functions Data Base Reference - Manual (Page 21)

MOD 30ML Functions
DISPLAY BLOCK
Format type:
Table 2-2 lists the different display format types and what fields are active for each type. A
referenced format cannot be NONE.
Low Limit:
Numeric entry per data type. Low limit must not exceed high limit.
For line display, this is the minimum allowed operator entry.
For a bar display, it is the value for which the bar will indicate 0% (center scale for
deviation).
High Limit:
Numeric entry per data type.
For line display, this is the maximum allowed operator entry.
For a bar display, it is the value for which the bar will indicate 100%.
Entry Method:
None, Immediate (value changes as change is made), Enter Req’d (key defined as ENT for
enter must be pressed to make change). Entry method cannot be IMMEDIATE for TIME1 -
TIME4, ASCII, HEX, and DATE display formats.
Engineering Units:
A four character alphanumeric to appear after a line formatted variable.
2-13