Micromod MOD: 1750N Output holder for MOD 30ML - Manual (Page 38)

Output Holder Instructions
OPERATION AND MAINTAINANCE
5.3 TROUBLESHOOTING AND MAINTAINANCE
Indication
Possible Cause Solution
The bar graph does not
show any indication The output is zero percent.
This is because each
segment in the bar graph
represents 10 % of the value.
Each segment has varying
light intensity to represent
any intermediate value.
The bar graph does not
show any indication and
pressing the UP key does
not change the value This could be because there
is no load at the output of the
output holder or the wires are
cut or there is loose
connection at the terminals.
Faulty instrument Check the wiring at the
terminals 6 and 2 at the
back or the load (Current
to pressure converter or
the final control element).
Call customer service.
5 -3