Micromod MOD: 1750N Output holder for MOD 30ML - Manual (Page 9)

Output Holder Instructions
PRODUCT DESCRIPTION
1.7 SPECIFICATIONS
ANALOG INPUT INPUT/OUTPUT CHARACTERISTICS
Span (0 to 100%)
Lower Limit
Upper Limit
4 to 20 mA
2.72 mA
21.28 mA
Analog input resistance
Analog output (I out)
Resistance
Open circuit output voltage
250 ohms typical
50 kohms min
24V dc max
ANALOG OUTPUT (I out) ANALOG OUTPUT LOAD CAPABILITY
Span (0 to 100%)
Lower Limit
Upper Limit
4 to 20 mA
2.72 mA
21.28 mA
Resistance
Capacitance
Inductance 800 ohms max
10 micro F max
10 H max
CURRENT RETURN (I Return) POWER SUPPLY REQUIREMENTS
Span (0 to 100%)
Lower Limit
Upper Limit
1 to 5 mA
0.68 mA
5.32 mA
Normal Operating Range
Allowable Operating range
Allowable Ripple Maximum
Current
23V to 28V dc
20V dc to 28 V dc
1.0 V peak to peak
200 mA max
CALIBRATED ACCURACY (% of span) ENVIRONMENTAL CHARACTERISTICS
I out, Run mode
(with respect to analog input)
I out, Hold mode
(with respect to run mode analog
input)
I return, Run mode
(with respect to analog input
span)
I return, Hold mode
(with respect to run mode analog
input span) ± 0.5% max
± 1.0% max
± 0.8% max
± 1.2% max
Humidity effect
Static discharge
RFI
Operating temperature
Storage temperature
±0.1% from 25 to
95% relative humidity
at 9°F (32 °C)
<= 10 kV
SAMA standard PMC
33.1.1978 class 1,
Bands A,B, and C
+41°F (+5°C) to
122°F (50°C)
-40°F (-40°C) to
167°F (75°C)
INDICATION ACCURACY PHYSICAL CHARACTERISTICS
1 bar 10% ± 2% of
output span Width
Depth
Height
Weight. 69mm
292mm
35mm
600 GMS
1 -5