MIDLAND CT710 - 2014 - Manual (Page 42)

12 | CT710 Instruction Guide
Frequency Mode
‘SINGLE BAND’
R 430.02500
receive frequency
T 430.02500
transmit frequency
‘DUAL BAND’
A 145.025
B 430.025
Press flank key1 for two seconds to enter or exit the dual-band or single-
band mode.
Radio Function
This radio comes with the FM function.
Press
MENU and then flank key 1 or 2 to enter the radio status.
To select your favorite radio frequency to listen directly, turn the encoder.
Radio stations can be programmed by software and push the
VFO/MR to
switch to the programmed radio frequencies.
To exit the radio encoder, press the
MENU and then flank key 1 or 2 .
The Flank Key Definition
By using the programming software, you can define the flank key 2 as:
1. DTMF code call
2. send 1450Hz code
3. send 1750Hz code
4. send 2315Hz code
When defined as one of the above, push the
flank key to activate the
selected function.
DTMF Code
This radio has the DTMF function.
In the transmitting status, press the numbers on the keypad or the flank
keys and the corresponding DTMF code will be issued. The DTMF code
issued by the key buttons are as follows:
MENU stands for A , ENTER stands for B , VFO/MR stands for C , FM stands
for D .