MIDLAND CT710 - 2014 - Manual (Page 51)

CT710 Instruction Guide | 21
The screen will show “007 LED?” . Press ENTER and you will see on
the display ”ON” (backlight on). Turn the encoder to select “ON” “OFF”
“AUTO” .
Press ENTER to confirm, and VFO/MR to exit.
Backlight Color Selection
In channel/frequency mode, press MENU and 8COLOR : the display will
show “008 LIGHT?” .
Press ENTER and by turning the encoder, you have the color options:
“ORANGE” , “PURPLE” , “BLUE” .
Press ENTER to confirm the desired backlight color and VFO/MR to exit.
Beep On/Off
If you enable this function, every time a button is pressed, you will hear
a Beep tone.
In channel/frequency mode, press
MENU and 9BEEP : “009 BEEP?” will
appear on the display.
Press
ENTER : “ON” means beep on, “OFF” means beep off; turn the enco-
der to choose one of the two options. Press ENTER to confirm and VFO/
MR to exit.
Keypad Lock Function Setting
This function is useful to lock the keypad and so, avoid any accidental
pressure of the buttons.
Press
MENU and turn the encoder to item 11: the screen will display
“011 KEYBO?” .
This transceiver has 2 types of Keypad lock available: Auto-lock and Ma-
nual-lock.
Press
ENTER : the display will show “AUTO” (keypad lock turns on auto-
matically).
Turn the encoder to select
“MANUAL/AUTO” , then press ENTER to
confirm and VFO/MR to exit.
You can also press *LOCK : the display will show “LOCK?” .
If you want to lock the keypad hold down *LOCK for 2 seconds. To unlock
the keypad, press *LOCK again for 2 seconds: the keypad will be unlo-
cked.