Table of solutions – MIDLAND CT710 - 2014 User Manual
Page 58
28 |
CT710 Instruction Guide
Table of solutions
PROBLEM
SOLUTION
The radio doesn’t switch
on
The battery may be exhausted. Recharge it.
Uncorrected installation. Re-install it.
Battery recharge doesn’t
last long
The battery pack is over. Change it with a
new one.
Battery pack is not completely charged.
Reception led turns on
but no sound heard
Make sure the volume is not too low
Make sure to have the same CTCSS and DCS
codes of your group
The keypad doesn’t work The keypad lock function hasn’t been ena-
bled.
In standby, the radio
transmits without
pressing PTT
VOX level has been set too low. Adjust it.
Some functions cannot
be stored
Ensure to be on Channel mode. In Channel
mode some functions can be set only
through the programming software.
Reception of other
group signal while
transmitting
Select another CTCSS/DCS for your group