MotorVac CarbonClean1000 - Manual (Page 6)

    2012 MotorVac, Inc.
5
Descriptions of the gauges, control switches, and status indicators that make up the control panel are
listed below. Please become familiar with these control panel features and functions before using the unit
.
1. Air pressure regulator – Used to adjust the system pressure in the cleaning process.
2. Power light indicator – Illuminates when the power cables are connected to a 12VDC power
source.
3. Ready light indicator – Illuminates when there is fluid in the machine indicating it is ready for
the service.
4. Service complete indicator – Illuminates when the service is complete.
5. Fuel Line pressure gauge – Indicates the pressure in the vehicle’s fuel lines.
6. Machine pressure gauge– Indicates the pressure the CarbonClean 1000 is supplying to the
vehicle during a service.
7. Adapter tray – Contains the adapters necessary to connect the CarbonClean 1000 to the
vehicle’s fuel system.
8. Drip cap – Stops contaminants from entering the inlet filter when not in use.
9. Inlet port – Accepts can and transfers the fuel system cleaner and engine decarbonizer into the
CarbonClean 1000.
10. Inlet filter – Filters debris from entering the machine and vehicle’s fuel system.
11. Quick coupler – Connects the CarbonClean 1000 to the appropriate adapter.
12. Service hose – Transfers fluid from CarbonClean 1000 to vehicle.
13. Pressure relief/fuel system flow test button – Use to relieve pressure before disconnecting the
CarbonClean 1000 from the vehicle and to perform fuel pump diagnostic flow test.
14. Pressure relief/fuel system flow test bottle – Collects fluid when relieving pressure and
performing a flow test on the vehicle’s fuel system.
15. Power cable – Connect to vehicle’s battery before performing a service.