MotorVac CarbonClean1000 - Manual (Page 7)

    2012 MotorVac, Inc. 6
Safety Information
Please become familiar with all safety procedures described in this chapter.
IMPORTANT
Failure to observe these precautions, or the
improper use of equipment, could result in
property damage or serious injury.
Follow the safety procedures in this chapter each
time the unit used.
Safety Before Starting
Follow these safety procedures before starting any service with the unit.
Ventilate the Work Area.
To avoid breathing harmful fumes and exhaust, make sure the unit is always used in a well ventilated
area, away from all flames, sparks, and other ignition sources.
Keep a Fire Extinguisher On Hand.
Keep an approved fire extinguisher within easy reach.
Check Oil and Coolant Levels.
Check engine oil and coolant levels and add oil or coolant if necessary.
Check Polarity.
Always use proper polarity on battery posts. When connecting the unit to a battery, connect the positive
( red ) battery lead to the positive ( + ) battery terminal. Connect the negative ( black ) lead to the negative ( - )
battery terminal (11-15 VOLTS DC).
Avoid Open Flames and Sparks.
Keep lighted cigarettes, open flames, or other ignition sources away from the battery.
Use Caution at All Times.
Use safety goggles and keep hands, hair, loose clothing, and jewelry away from the battery, fan blades,
belts, and other moving parts of the vehicle engine.
Ensure Vehicle is safe
Before beginning a service ensure the vehicle is in satisfactory condition (i.e. broken or loose fuel lines,
ignition wires, battery cables, electrical wires, fuses and relays.)
Relieve Fuel Tank Pressure.
Before performing any fuel system service remove or loosen the fuel filler cap to the vehicle to relieve
fuel tank pressure.