Diamond Products CC155 - Manual (Page 26)

22
Troubleshooting
Table 6: Saw Troubleshooting
Symptom Problem Solution
1. Saw will not lower. Handlebar lever out? Push lever in to lower saw.
2. Blade does not cut straight.
Excessive force applied while
sawing?
Reduce forward speed.
Wrong blade for application?
Contact dealer/manufacturer of
blade.
3. Short belt life.
Loose belts causing slippage? Check belt tension regularly.
Sheaves misaligned?
Use straightedge to check blade
shaft sheave alignment.
Worn sheave grooves? Check for groove wear.
Overheating of belts? Check belt tension.
4. Refer to engine manual and manufacturer for engine troubleshooting information.