Diamond Products CC7074 - Manual (Page 10)

7
Introducing the CC7074
Controls
Figure 1: CC7074 Controls
1. Handlebar Lock Lever–Locks handlebar in
position.
2a. Water Valve and Hose Fitting–(LH side) -
Lever controls water flow rate; hose fitting
connects to water source hose.
2b. Water Valve and Hose Fitting–(RH side)-
Lever controls water flow to blade guard; hose
fitting connects to water supply hose.
3. Fuel Tank Cap–Fill port; indicates fuel level.
4. Spotlight Bar Lock Knob–Locks spotlight bar
in position.
5. Blade Gearbox Temperature Light–Indicates
high oil temperature in blade gearbox.
6. Radiator Cap–Fill port when adding or changing
radiator fluid.
7. Cable Cleat–Secures front pointer rope.
8. Blade Lowering Speed Valve–Adjusts saw’s
lowering speed.
9. Emergency Stop Button–Stops the engine.
10. Low Blade Water Light–Indicates low water
pressure to blade.
11. Blade Depth Stop Switch–Sets and resets
blade depth setting.
12. Blade Depth Set Light–Indicates blade depth is
set.
13. Spotlight–Light source.
25
1
4
14
13
24
2b
19
9
11
21
26
20
22
23
10
12
15
8
3
2a
16
4
18
1
17
7
6
5