Diamond Products CC7074 - Manual (Page 11)

8
14. Cutting Depth Indicator–Indicates blade’s
depth from surface.
15. Vernier Throttle–Increases or decreases
engine speed.
16. Coolant Temperature Gauge–Indicates engine
coolant temperature. Note: Check the cooling
system when the coolant temperature light turns
on, or when the coolant temperature gauge
passes the red mark.
17. Ignition Switch–Four-position switch activates
the glow plug, stops the engine, provides power
to certain accessories, or starts the engine.
18. Engine Warning Light Gauge–Indicates high
coolant temperature, low oil pressure, low
battery voltage, and an energized glow plug.
19. Blade Tachometer/Hour Meter–Indicates blade
speed and total number of saw hours operated.
20. Auto Water Switch–Activates automatic water
system. Water turns on/off when depth indicator
enters Auto Water On/Off Zone.
21. Free Wheel Switch–Allows operator to move
saw forward/backward (with ignition switch at
Run).
22. Speed Control Lever–Forward, stop (neutral),
and reverse control.
23. Control Grip–Two pushbuttons on front of grip
raise or lower the saw and blade. Pushbutton
on side of grip tilts handlebars, allowing them to
be moved up or down to desired position.
24. Blade Clutch Switch (optional)–Allows
operator to engage or disengage blade rotation.
25. Spotlight Switch–Activates spotlight.
26. Water Pump Switch (optional)–Activates water
pump.