DoorKing 1602 Barrier Gate - Manual (Page 8)

ALUMINUM ARM FOLDING KIT
Installation
DoorKing Part Number
1601-310
This kit is designed for the 1600 model barrier gate operators only. Recommended for low headroom applications.
Kit Includes:
Cut this arm
first for the
height
limitations.
Determining First Arm Length
Cut this arm second for the
traffic lane width.
Note: Second arm can be a
different length than the first.
Determining Second Arm Length
Cut Arms to Length
Traffic Lane Width
Total Height
Pre-Crimped Eyelet
Cable Attachment Assembly
Cable
2 Aluminum Arms with End Caps
(Connected)
Arm Hinge
8 Self Tapping Screws
Cable
Clamp
Cable Eyelet
Locking Eye Bolt Locking Turnbuckle
Note: Completed folding arm
assembly shown in the UP position
to illustrate the total height.
Note: Completed folding arm assembly
shown in the DOWN position to illustrate
traffic lane width.
1
2
120 Glasgow Avenue
Inglewood, California 90301 U.S.A.