Features, Technical specifications, Available poe wattage at poe device w atts – Nitek ET1500UWS User Manual

Page 2

Advertising
background image

Network Transmission Device & Enclosure


Network Port

RJ45 Connector


Link

Port

RJ45

Connector


Ethernet

100BASE-TX Full Duplex


Dimensions:

Transmitter

4.6” x 1.6” x 1.1” including tabs

Enclosure

9.92” x 5.74” X 2.17”


Internal Volume:
Enclosure 98

in

3


Operating Temperature:

ET1500U

-15° to 75° C / 0° to 167° F

Enclosure

-40° to 120° C / -40° to 248° F


Rating/Listing

UL94-HB,

IEC/UL 60950-1, IEC

529, NEMA 1, 2, 4, 4x, 12, 13


Shipping Dimensions

10” x 6” x 3”


Shipping Weight

4 lbs

Features

Supports 10/100 and PoE over category rated cables up
to distances of 600 meters (2000 feet)

 

Transmitter housed in a NEMA 4X rated enclosure for
outdoor applications

 

Fully transparent to the network

 

Supports any network device, including mega-pixel
technology IP cameras

 

Easy to install, no set up required

No MAC or IP addressing required

 

LED indicators for network signals, link status and power

 

Optional power supply can insert PoE power for non-
PoE switches

 

Ground loop isolation

UL Listed IEC/UL 60950-1

Designed to IP 65 of IEC 529 and NEMA 1, 2, 4, 4x, 12,
and 13 Specifications

Cover attaching screws are outside the sealing area,
preventing ingress of moisture and dust

Cover screws are M-4 Stainless Steel, Non-Magnetic
and Fasten into threaded Brass Inserts

Connection Network

Standard RJ45


Connection Power

Push-in terminals - rate @ 5

Amps

Clamping
12/24VAC/DC

30 Vrms

Data/PoE+ Ethernet

58 Vp-p


Transient Response Time

1 picosecond typ.


Peak Pulse Power Dissipation

3,000 W/pair (10/100us)


Impedance

50 or 75 Ohms


Operating Temperature

-40° to 85° C / -40° to 185° F


Dimensions

2.5” x 1.8” x 0.9”


Shipping Weight

1 lb

Technical Specifications

EL1500UW & ET1500UW

IPPWR1 Surge Protection for use in the ET/EL1500UWS

Heavy duty single point ground

1 picosecond clamping time

Lifetime warranty

Separate power protection for 12 or 24 VAC

Will pass PoE+ power

29.2

27.1

25.2

20.3

16.8

11.1

13.7

15.4

15.4

15.4

30.0

25.0

20.0

15.0

10.0

0.0

500 Meters

1,640 Feet

400 Meters

1,300 Feet

300 Meters

1,000 Feet

200 Meters

650 Feet

100 Meters

328 Feet

29.2 Watts
15.4 Watts

27.1 Watts
15.4 Watts

25.2 Watts
15.4 Watts

20.3 Watts
13.7 Watts

16.8 Watts
11.1 Watts

802.3AT
802.3AF

Available PoE Wattage At PoE Device

W

atts

* Results charted were calculated using four pair 24awg Cat5e cabling and
power sourcing equipment using IEEE 802.3AF standard with starting voltage
of 48 volts DC and IEEE 802.3AT standard with starting voltage of 54 volts
DC. PoE Switches with internal power and current limits may change individ-
ual results.

Advertising
This manual is related to the following products: