Nitek EL1500CW - Manual (Page 8)

Troubleshooting
PROBLEM POSSIBLE CAUSE
No video/data
Check camera and EL1500CW device connections.
Check coax cable condition and BNC connectors.
Check that the camera is powered.
Check that supplied camera power meets manufacturer’s
specifications.
Check cable that cable distances do not exceed PoE
capabilities. Refer to chart on pg# 7.
Check that coax cable does not exceed the Ethernet data
transmission operating distances of the EL1500CW.
Check link & device status. See chart on pg# 7.
Video/data loss
Check network switch terminations & link status.
Check network routing table(s).
Confer with site Network Administrator
For Tech Support Call 1-(800)528-4343
Network Transmission Device
Network Port RJ45 Connector
Link
Port BNC Coax Jack
Ethernet
100BASE-TX Full Duplex
Device Dimensions
1.1” x 1.6” x 5.1” including tabs & BNC
Power Draw per Device
1.65 Watts
PoE Compliance
IEEE802.3f & IEEE802.3at
LED Status Indicators
See Chart on Pg 7
NEMA4 Case Dimensions
6.73” x 4.76 X 2.17” including water-proof grommets
Operating Temperature
-15° to 75° C / 0° to 167° F
Shipping
Weight 5 lbs
Technical Specifications