Pach and Company AeGIS 9000 Series Manual User Manual
Page 40
HOW TO USE THE
COMBINATION OF
CARD ACCESS AND
KEYPAD ACCESS CODE
HOW TO USE THE
ALARM TELEPHONE
NUMBER
RELAY 2 MODES
Step 1
Function Code 24 must set to 1
Step 2
Place the card close enough to the red light emitting diode (LED) on the reader,
if the card access is valid the display shows
proceed to step 3
if the card is invalid the display shows
NOTE: If invalid card access is used more than the number program on
Function Code 03, the display shows
If a telephone number is programmed on Function Code 09, the display shows
and will call the number
programmed
Step 3
Enter a valid keypad access code then press # and the door will unlock.
If an invalid keypad access code is entered the display shows
NOTE: If invalid keypad code is entered more than the number program on
Function Code 03, the display shows
If a telephone number is programmed on Function Code 09, the display shows
and will call the number
programmed
A phone number on Function Code 29. The system displays shows
If invalid keypad access code, card access or keypad access code + card access are
used. The system will call the phone number programmed on Function Code 09 and the
receiving party will hear continuous beeps.
This feature is not applicable if Relay 2 is set as MODE 3 on Function Code 08.
Relay 2 is an auxiliary relay. It can be set into four (4) different modes: Door Control
(mode 1), Shunt (mode 2), Alarm Timer (mode 3) and CCTV Switch (mode 4). You may
use relay 2 for various applications as specified below.
Door Control (Mode 1)
Relay 2 can be connected to the second door or gate operator. The tenant can use
number "8" on his or her phone to open relay 2 (door 2) remotely. The connection to the
door strike is identical as relay 1 (see figure 2.1 for AeGIS 9000 wiring diagram).
Pach and Company
Chapter 4
Page 33
AeGIS 9000 Series
SYSTEM’S OPERATION
Input Access
Code: _ _ _ _ #
ERROR Wrong Code
PLEASE TRY AGAIN
INVALID CODE! !
ACCESS DENIED
ALARM ACTIVATED
ERROR Wrong Code
PLEASE TRY AGAIN
INVALID CODE! !
ACCESS DENIED
ALARM ACTIVATED
ALARM ACTIVATED