PASCO PS-2164 Quad Pressure Sensor - Manual

®
I n s tr u c t i o n S he e t
0 1 2 - 0 9 0 1 2A
Quad Pressure Sensor
PS-2164
Introduction
The four-port Quad Pressure Sensor is a multi-sensor capable
of reading up to four absolute pressures, or two differential
pressures, or two gauge pressures. Dynamic variable
over-sampling automatically reduces measurement noise at
low sampling rates. Sample rates up to 1000 Hz make studies
of both transient and steady-state pressure possible. The sen-
sor measures pressure in units of kPa, N/m
2
, and pounds per
square inch (psi).
Setup
Types of Pressure Measurements
To measure pressure in an apparatus, connect one or more of
the four pressure ports using the included tubing and connec-
tors. The way that you connect the Quad Pressure Sensor
PS-2164
1
QUAD PRESSURE SENSOR
PRESSURE SENSORS
2
3
4
PO
WER
Quick release Connectors
Tubing Connectors
Polyurethane
Tubing
Quad Pressure
Sensor
Connect to
PASPORT interface
Pressure Ports
Included Equipment Part Number
Quad Pressure Sensor PS-2164
Polyurethane Tubing (length 2.4 m) 640-023
Quick-release Connectors (qty. 4) 640-021
Tubing Connectors (qty. 4)
640-030
Required Equipment
PASPORT Interface
1 See PASCO catalog
or www.pasco.com
1 PASPORT interfaces include the AirLink (IW-4100 or PS-2005), Xplorer
GLX (PS-2002), Xplorer (PS-2000), PowerLink (PS-2001), and USB
Link (PS-2100)