PASCO PS-2119 Acceleration Sensor - Manual

®
PS-2119
The PS-2119 Acceleration Sensor measures acceleration in three axes:
x, y, and z.
Acceleration Quick Start
Additional Equipment Needed
• USB Link (PS-2100) with USB-compatible computer or Xplorer (PS-2000)
EZscreen or DataStudio ® software (version 1.6.2 or later)
Equipment Setup
1. Connect the sensor to a USB Link or an Xplorer.
2. Connect the USB Link or Xplorer cable to a USB port on your computer
or a USB hub.
3. The software launches when it detects a PASPORT TM sensor. Select
EZscreen or DataStudio.
Sensor Specifications:
Sensor Range: +/- 10 g
Accuracy: +/- 1 % of full scale
Resolution: 0.010 g
Frequency Response: 6 Hz (slow), 25 Hz (fast)
Default Sample Rate: 10 samples/sec
Maximum Sample Rate: 500 samples/sec
800-772-8700 • 916-786-3800 • [email protected] • www.pasco.com 012-07798A
1 2
3
Acceleration Sensor
LED button for
changing the sensor
response rate