Wireless settings, Network settings, 23 network settings – Actiontec electronic WNS100 User Manual
Page 26
22
Actiontec Wireless Network Attached Storage Device User Manual
23
Chapter 3 Using the Administrative Utility
Wireless Settings
See Chapter 4, “Configuring the Wireless Settings,” for more information.
Network Settings
This screen allows the modification of the
NAS
Devices network settings.
M
Warning: Actiontec recommends leaving these values at their
default settings. Only experienced network administrators
should modify any of the setting in this screen.
Obtain IP Address Automatically (DHCP Client)
Do not select this option unless a
DHCP
server is connected to the network. A
DHCP
server provides an
IP
address to computers and other devices.
Fixed IP Address
Select this if the Network does not have a
DHCP
server, and enter the following
data:
IP Address
The
IP
address must be unused, and compatible with the computers on the
network. Usually, this means the first three text boxes should be the same as the
computer, and the last text box must be an unused number between 1 and 254.