Setting up wireless security – Actiontec electronic WNS100 User Manual
Page 50
46
Actiontec Wireless Network Attached Storage Device User Manual
47
Chapter 4 Configuring the Wireless Settings
6. Select a wireless channel from the “Channel” drop-down menu. This option
works only if Access Mode was selected in step 2. All devices on the wireless
network must be operating on the same channel in order to communicate
with one another. Selecting Automatic allows wireless devices to join the net-
work, without regard to channel number.
7. Set up the wireless security (see “Setting Up Wireless Security,” below.)
8. Click Save at the bottom of the screen to save all changes.
The
NAS
Device is now configured for wireless operation.
Setting Up Wireless Security
At the bottom of the Wireless Settings screen is the “Wireless Security” section.
There are three options in this section: No WEP, WEP, and WPA-PSK.
No WEP
Selecting No WEP from the “Wireless Security” drop-down menu disables wireless
security. If selected, any wireless device with access to the wireless network’s SSID
can join the wireless network.