Actiontec electronic WNS100 User Manual
Page 30
![background image](/manuals/34071/30/background.png)
26
Actiontec Wireless Network Attached Storage Device User Manual
27
Chapter 3 Using the Administrative Utility
View Log
Click this button to view the log file in separate window. The log file is a record of
activity on the
NAS
Device, which can help in management and troubleshooting.
Enable NTP (Network Time Protocol)
If enabled, the
NAS
Device will synchronize its clock with a
NTP
(Network Time
Protocol) Server.
NTP Server
Enter the domain name or
IP
address of the
NTP
server to be used. The
NTP
server
can be a public server (on the Internet) or a local server (on the local network).
NTP Status
This shows the status of the
NTP
update procedure.
Synchronize…
Select how often the
NAS
Device synchronizes its clock with the specified
NTP
device. The time of the next synchronization can also be set.
Sync Now
Click this button to synchronize with the
NAS
Device immediately.
Send E-Mail Alerts…
Click here to enable the sending of e-mail alerts by the
NAS
Device. Alerts will be
sent when there is some problem requiring the administrator’s attention.
E-Mail Address (1)/(2)
Enter the e-mail addresses to which the alerts will be sent.
Subject
Enter the text that will appear in the “Subject” text box of an e-mail alert.